full screen
Home > Science & Mathematics > Physics > Classical mechanics > Modeling, Identification and Control Methods in Renewable Energy Systems
Modeling, Identification and Control Methods in Renewable Energy Systems

Modeling, Identification and Control Methods in Renewable Energy Systems


     0     
5
4
3
2
1



International Edition


About the Book

Emulation of Wind Turbine for Standalone Wind Energy Conversion Systems.- The ripple correlation optimal point determination in a medium power wind conversion system and performance evaluation with respect to conventional algorithms.- Direct Power Control of DFIG Using Sliding Mode Control Approach.- Photovoltaic power prediction using recurrent neural network.- Control of Wind Turbine based on PMSG using Pitch Angle Control.- Feedback T-S fuzzy controller in finite frequency for wind turbine.- Control of Power of a DFIG Generator with MPPT Technique for Wind Turbines Variable Speed.- A Comparative study between PI and sliding mode control for the DFIG of a wind turbine.- A comprehensive Comparison of two Behavior MPPT Techniques, the Conventional (Incremental Conductance (INC)) and Intelligent (Fuzzy Logic Controller (FLC)) for Photovoltaic Systems.- Modeling and performance analysis of a solar PV power system connected to a three phase load under irradiation and load variations.- Intelligent Load Frequency Control in Presence of Wind Power Generation.- ZedBoard-FPGA Control of the DFIG based Wind Power System.- An FPGA-based control of the PMSG on Variable Wind Speed Turbine.- Modeling and Comparison of Boost Converter With Cascaded Boost Converters.- Fault Tolerant Control of Switch Power Converter In WECS Based on a DFIG.- SSDI-Max control and its applications in renewable.- Nonlinear Control of variable speed Wind Energy Conversion System based PMSG.

About the Author: Nabil Derbel is Professor in Control Systems Theory at the Electrical Engineering Department of The "National Engineering School of Sfax", University of Sfax, Tunisia. He received his engineering Diploma from the "Ecole Nationale d'Ingénieurs de Sfax" in 1986, the "Diplôme d'Etudes Approfondies" in Automatic control from the "Institut National des Sciences Appliquées de Toulouse" in 1986, the "Doctorat d'Université" degree from the "Laboratoire d'Automatique et d'Analyse des Systèmes de Toulouse" in 1989, and the "Doctorat d'Etat" degree from the" Ecole Nationale d'Ingénieurs de Tunis". His current interests include: Optimal Control, Sliding Mode Control, Complex Systems, Fuzzy Logic, Neural Networks. He is the author and the co-author of more than 80 papers published in international Journals and of more than 500 papers published in international conferences. Currently, Professor Derbel is associate editor of International Journal of Modeling, Identification and Control, the editor of International Journal of Digital Signals and Smart Systems, and co-editor (and co-founder) of Transactions on Systems, Signals & Devices, an International Journal, which has been renamed in 2017 as Advances in Systems, Signals & Devices. He has edited a book for Springer entitled "Applications of sliding mode control", in 2017.

Quanmin Zhu is Professor in control systems at Department of Engineering Design and Mathematics, University of the West of England, Bristol, UK. He obtained his MSc. in Harbin Institute of Technology, China in 1983 and PhD in Faculty of Engineering, University of Warwick, UK in 1989. His main research interest is in the area of nonlinear system modelling, identification, and control. He has published over 160 papers on these topics and provided consultancy to various industries. Currently Professor Zhu is acting as member of editorial board of International Journal of Systems Science, member of editorial board of Chinese Journal of Scientific Instrument, editor (and founder) of International Journal of Modelling, Identification and Control, and editor of International Journal of Computer Applications in Technology.


Best Sellers



Product Details
  • ISBN-13: 9789811319440
  • Publisher: Springer
  • Publisher Imprint: Springer
  • Height: 234 mm
  • No of Pages: 372
  • Series Title: Green Energy and Technology
  • Weight: 761 gr
  • ISBN-10: 9811319448
  • Publisher Date: 14 Jan 2019
  • Binding: Hardback
  • Language: English
  • Returnable: Y
  • Spine Width: 22 mm
  • Width: 156 mm


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Modeling, Identification and Control Methods in Renewable Energy Systems
Springer -
Modeling, Identification and Control Methods in Renewable Energy Systems
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Modeling, Identification and Control Methods in Renewable Energy Systems

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Booksbay (the "CRR Service").


    By submitting any content to Booksbay, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Booksbay (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Booksbay a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Booksbay may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Booksbay's sole discretion. Booksbay reserves the right to change, condense, withhold publication, remove or delete any content on Booksbay's website that Booksbay deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Booksbay does not guarantee that you will have any recourse through Booksbay to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Booksbay reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Booksbay, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Booksbay, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals



    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!