PrefaceAcknowledgements
1. Basic Considerations
1.1. Classification of fire sources
1.2. Properties of combustible materials 1.3. Definitions related to fires
1.4. Flammability tests
1.5. Non-dimensional numbers for fires
Review Questions
References
2. Review of Thermodynamics and Mass Transfer for Fires
2.1. Stoichiometry
2.2. Heat Calculations
2.3. Flame Temperature
2.4. Notes on Transport Processes in Fire
Review Questions
References
3. Diffusion and Premixed Flames Related to Fires
3.1. Physical aspects
3.2. Important attributes and their occurrence in fire 3.3. Structures of homogeneous and heterogeneous diffusion flames
3.4. Structure of premixed flames
3.5. Dynamics of large fires 3.6. Soot production in diffusion flames
3.7. Soot production in premixed flames
Case studies Review Questions
References
4. Burning of Liquids
4.1. Evaporation
4.2. Ignition
4.3. Flame spread over liquid fuel surfaces
4.4. Mass burning rate
Case studies Review Questions
References
5. Burning of Solids
5.1. Pyrolysis
5.2. Ignition
5.3. Flame spread over solid fuel surfaces
5.4. Mass burning rate
Case studies Review Questions
References
6. Properties of Fire Plumes
6.1. Characteristics of fire plumes
6.2. Theoretical analysis of idealized fire plumes
6.3. Air entrainment rate
6.4. Plume interaction with ceiling
Case studies
Review Questions
References
7. Compartment Fires
7.1. Pre flash over 7.2. Post flash over
7.3. Zone modeling and Field Modeling
7.4. Implementation of CFD fire model
Case studies
Review Questions
R
About the Author:
Dr. Ali S. Rangwala is a Professor of Fire Protection Engineering at Worcester Polytechnic Institute (WPI). He has a Ph.D. in Mechanical and Aerospace Engineering from the University of California, San Diego. He received the NSF CAREER award on Controlling Mechanisms of Dust Layer Ignition and Flame Propagation in Dust Clouds. He has also served on panels for the National Science Foundation (NSF), Occupational Safety and Health Administration (OSHA), National Fire Protection Association, (NFPA), and National Aeronautics and Space Administration (NASA), related to areas of combustion, fire and explosion. He has 4 patents related to different topics in combustion. He has published over 60 peer-reviewed international journal articles and has presented in over 70 conferences. He teaches three graduate courses: Explosion Protection, Industrial Fire Protection, and Combustion at the Department of Fire Protection Engineering in WPI.
Dr. Vasudevan Raghavan is currently Professor in the Department of Mechanical Engineering, Indian Institute of Technology Madras (IIT), India. He obtained his Ph.D. from IIT Madras and has carried out his postdoctoral research in the University of Nebraska-Lincoln, USA, in NASA aided microgravity droplet combustion simulations. His areas of research include computational fluid dynamics applied to reacting flows, laminar flames, fire modelling, evaporation and combustion of liquid fuel droplets, flame spread and liquid fuel pool combustion, gasification and combustion of coal and biomass. He has authored about 110 international peer-reviewed journal articles and 60 international conference articles. He teaches graduate courses such as Theory of Fire Propagation, Fundamentals of Combustion, Combustion Technology and Applied Thermodynamics at the Department of Mechanical Engineering in IITM.
