Acknowledgements. Abstract. Preface.
PART I APPLIED PHOTOMETRY AND RADIOMETRY. I.1. Background.
Chapter 1 Radiometric and photometric quantities and notions. 1.1. Physical sense of radiometric conception. 1.2. Parameters of optical radiation. 1.3. Radiation interactions with material objects.
Chapter 2 Methods of photometric and radiometric measurements. 2.1. Evaluation of power and energy extents of optical radiation. 2.2. Analysis of attenuation factors. 2.3. Measurements of color coordinates and indices. 2.4. Photometry of integrating spheres.
Chapter 3 Radiometry of partially coherent radiation. 3.1. Coherence and radiative transfer. 3.2. Laser and pulsed light. 3.3. Interference phenomena and optical measurements. 3.4. Diffraction corrections and gratings in radiometry and photometry.
Chapter 4 Photometers and radiometers. 4.1. Optical design and absolute calibration of radiometers. 4.2. Attenuation and color photometers and spectrophotometers. 4.3. Photometric accuracy and verification of linearity.
PART II MEASUREMENTS OF OPTICAL LOSSES. II.1. Features of low-loss assessments.
Chapter 5 Conventional measurement techniques. 5.1. Internal transmittance and attenuation coefficient. 5.2. Specular reflectance. 5.3. Scattering factor.
Chapter 6 Systems of multiple reflections. 6.1. Flat-mirror and prism reflector cells. 6.2. Multipass cavities. 6.3. Mirror waveguides. 6.4. Multiplication of Raman scattering. 6.5. Interference-fringe reduction in multipass and derivative spectroscopy.
Chapter 7 Laser spectroscopy. 7.1. Active intracavity measurements. 7.2. Comparison of intracavity methods. 7.3. Intracavity and ringdown spectroscopy.
Chapter 8 Measurements in passive resonators. 8.1. Pulse-separation techniques. 8.2. Interferometric analysis. 8.3. Resonant phase-shift and decay-time studies. 8.4. Quality-factor transfer method and asymmetric-cavity measurements. 8.5. Evaluation of loss-dichroism and phase-dispersion.
Chapter 9 Determination of absorption losses. 9.1. Laser calorimetry. 9.2. Thermal-lensing, photothermal, and photoacoustic techniques. 9.3. Emissive spectroscopy. 9.4. Integrating spheres as multiple-reflection cavities.
Chapter 10 Direct attenuation measurements. 10.1. Differential, ratio, and single-channel systems. 10.2. Derivative spectroscopy. 10.3. Wavelength tuning and balanced detection. 10.4. Separation of bulk and surface losses. 10.5. Reflection spectrophotometry.
Chapter 11 Propagation losses in fibers and waveguides. 11.1. Measurements of internal optical attenuation for guided light. 11.2. Analysis of return losses via backscattered radiation. 11.3. Partition of distributed losses and attenuation factors in reflected light. 11.4. Interference noise and crosstalk in fiber transmission systems.
References.
About the Author: Michael A Bukshtab received M.S. and Ph.D. degrees in "Optical Design and Spectroscopy" and in "Physical Optics" from The Technical University of Fine Mechanics & Optics and from The Vavilov' State Optical Institute, and had post-doctoral tenure analyzing high-purity silica glasses and specialty fibers in The Institute of Silicate Chemistry, Academy of Sciences - all in St. Petersburg (Leningrad), Russia. His M.S. thesis received the Best Diploma award among nearly 30 Leningrad technical universities and was published in "Measurement Techniques" in 1978. Michael's monograph "The Low Loss Measurement Techniques", 165 pages, was published in 1988 by Energoatomizdat, Moscow-Leningrad. Another book: M.A. Bukshtab, A. S. Doynikov, and V. N. Koromislichenko, "Photometry and Radiometry for Engineers" (editors M. A. Bukshtab and A. A. Wolkenstein) by Polytechnika, Leningrad (St. Petersburg), 1991, was announced for publication, book proofs were printed, but manuscript was left unpublished, as Michael immigrated to the USA. Michael was elected by employees the Board Chairman of Leningrad's Institute of Telecommunications, where he served from 1989 until immigrating in 1991. In USA Michael worked on design, development, and fabrication of optical systems and components for such companies as Sandoz, Corning, Pirelli, Kodak, CIENA, Lucent, and GE Advanced Materials. Michael latest experience via Michael A Bukshtab Consulting includes designing complex systems and components and investigating various optical properties -measurement of color-shifting, polarization-dependent, backreflection, backscattering and other low-loss related phenomena, designing all-optical wavelength-switching and cross-connect systems and OADM networks, working on terabit optical routers and optical backplanes, investigating EUV lithography systems, interferometric and diffraction-based positioning sensors, improving fiber-laser and EDFA-based air-to-ground ranging lidars. Michael has authored and coauthored more than 30 Patents or Invention Certificates and participated in more than 70 Scientific Publications and Conference Presentations.
